Is Your Computer Working 'OK'?
Does your computer look and sound normal when it's sitting there shut-down, when it starts, when it runs, and as it shuts down? Maybe you have good
computer karma? Or is the hard drive whirling away when you're not doing anything, and little lights flashing on and off when you're only thinking about
something? Maybe you have 'bad computer karma?
Attached to, but a step beyond your computer is your personal network, and then the internet. Are your file downloads and uploads agonizingly slower
than usual, but you're not doing anything except uploading your latest movie to YouTube? How do you know what's normal to compare your system to?
Some experts will advise you to update your software, others to update hardware or drivers, and yet others have horror tales about viruses or adware.
How do you know who and what to believe? It helps to have some things to use at least to cross-check the advice.
I don't have all the answers, not even all the questions.... but what I do have, I'll share with you. In this issue I'll go over some of the things
I routinely check and how I do it.
... before getting into more details, here are some notes...
I submitted the MaximumPC article on Monday, about making a movie in Vista. It's about the 15 steps from camcorder tape to Photo Gallery
to Movie Maker to DVD Maker, ending with viewing a DVD playing on my XP laptop... I got a positive note back with a single request for another picture
showing the DVD playing on the laptop... a visual to add to the closing punch line.
The website pages about Vista are evolving... you may have noticed some changes. One of them was to tweak the image collage I use at the top of the
main page of the site and at the top of each newsletter. I dropped the version numbers 2 and 3 from Movie Maker and Photo Story, and put a screen shot
of my Vista system in the neptune monitor... with it looking stronger than the rest of the image. The first thing you notice in Vista is the eye-candy
of the aero-glass, so I'm notching up the in eye-candy in the Vista section.
I'm adding notes about what's on the Vista operating system... things like codecs available for third party apps. And I'm checking some of the apps
in my toolbox to see which ones open, and which ones work. VirtualDub works but VDubMod doesn't. IrfanView works but GSpot doesn't... etc. Some work,
some open but then don't function. Some don't open.
.... back to the main topic...
A Computer Once-Over
Here's the scene in my office...
There are 5 computers at my desk... my laptop and 4 desktops. There's another older laptop on a back bar behind me, and two systems downstairs used
by Bernadette (a desktop and tablet). Between my desk and a wall of stereo/TV equipment is a mess of cables, including a cable modem, a wireless router,
a bunch of power strips, USB2 hubs, and external USB drives. It's an area you don't walk on or vacuum... you try not to even look at it. The room is much
more wired than wireless.
My main computer is the HP laptop running XP's Media Center Edition. When I'm home, it's connected to its power adapter, an external USB TV tuner,
a USB wireless mouse, and a USB2 hub. The hub in turn has 3 external USB drives and a thumb drive in it's 4 connections.
The laptop sits on a couple strips of wood about 1/2" high so the air under it has more breathing space for the cooling system...
Per Microsoft, The design goals for
Windows XP on a typical consumer PC are:
Boot to a useable state in a total of 30 seconds
Resume from Hibernation in a total of 20 seconds
Resume from Standby in a total of 5 seconds
Boot and resume times are measured from the time the power switch is pressed to being able to start a program from a desktop shortcut.
Here's a link to a utility on your hard drive... an old utility at that for those of you who remember sysinf.
Among other things in this utility are lists of the audio and video codecs on your system... here's the video codecs it lists for my laptop, sorted
The list differs considerably from other lists such as those provided by GSpot.
Are they using the desired NTFS file system (at least for video work) so they are not limited to 4 GB max file sizes, less than 20 minutes of a DV-AVI
full are they, and are they defragged? Use Start > right click on My Computer > Manage > Storage > Disk Management and Disk Defragmenter. My drives are:
- C - 93 GB - NTFS - internal drive - 27 GB free (28%) - Analysis says it doesn't need defragging, but I'm going to do it anyway... the analysis
report shows lots of fragmented files. Before starting the defrag, click the File Size column to sort the list by size... note the biggies and think
about if you still need them. The first in the list of my C drive is a 3.68 GB file that was a test capture by Premiere Elements, which I don't
need. Delete it and empty the recycle bin before the defrag.
- H - 56 GB - FAT32 - external USB1 drive - 14 GB free (24%) - Analysis says it doesn't need defragging
- E - 466 GB - NTFS - external USB2 drive - 114 GB free (24%) - Analysis says it doesn't need defragging
- I - 233 GB - NTFS - external USB2 drive -38 GB free (16%) - Analysis says it needs defragging. The report says the most fragmented
file is a short DV-AVI one that is 69 MB in size and is stored in 4,767 fragments. Defragging would put all the fragments together for easier access
by the hard drive's head. After defragging, there were no more fragmented files.
Are the USB2 external drives using the policy of 'quick removal' or 'performance'.
If set to 'quick
they can be unplugged without using the 'safe removal' step, but won't work with larger DV-AVI files. If set to 'performance', they work fine capturing
to or from large DV-AVI files. Right click on My Computer > Explore > right click on an external drive > Properties > Hardware tab > select the drive
> Properties > Policies tab.
The defragging of all the drives happened in the background as I continued writing the newsletter... no need to stop doing things during it.
When done, the report said there were no more fragmented files, and the visual feedback showed a better picture... here's the one with the most dramatic
change in it's picture.
I run at the highest screen resolution of 1680 by 1050 pixels... the highest varies with the computer. The refresh rate is 60 Hertz (raise it if you
see flickering... mine only offers the one setting with this resolution).
They say an LCD holds it's color calibration and only needs it once, so I only did it once. We use a 'spyder' device to calibrate monitors.
When I plug my laptop into the projection system at the library, the two systems work together to decide what resolution is best... as a result the
100 or so icons on my desktop get reshuffled to where I don't want them. To put them back, I use
Icon Saver... running it before heading to the library to make note
of the icon positions, and then again when I return home to put them all back to where they started.
You might hear the whirring of the main cooling fan or feel the warmth (or heat) of the laptop. If the whirring goes on too long or the warmth is too
hot, it's time for at least a quick look.
I did an overnight defrag of the I drive... it was finished in the morning, and things were quiet when I sat down at the laptop, but the cooling fan
started to run when I resized the defrag report window to take a snapshot, and it continued on and on... a quick check of the Task Manager showed the
CPU running steadily at 50%, a good reason for the fan to be on..... but I hadn't told the defrag utility to do anything.
The process tab, sorted by CPU, shows the defrag process using the 50%, and using 1/2 GB of memory, and all it was doing was resizing window.... I
thought. It must have been doing something in the background.
I told it to something productive, defrag the C drive.... at the 3% progress point the main fan stopped and you could hear only the quieter purring
of the smaller CPU fan.
Vacuuming the dust collection in the computer helps with air flow and cooling.
and Virtual Memory....
If things are working fine, but all of a sudden you hit a brick wall.
Things slow down considerably, by a factor of 10 or more. What happened?
If you've reached the full use of your physical memory (RAM), and are now dipping into the virtual memory swap file on your hard drive... it's normal.
But are you at that point?
To find out, don't close anything... open your Task Manager and check the current use of memory.
If the figure for 'currently used' memory is more than your physical RAM, then your system is dipping into the swap file on the hard drive... the computer
goes in and out of RAM lots faster than it does the hard drive... that's why the big slowdown.
The picture shows my laptop with its 2 GB of RAM, current usage of 1.2 GB, with the peak usage of 1.8 GB since I turned the system on last night.
Note that Vista can use a SanDisk Cruzer Micro, a smart USB flash drive... the computer uses it as a quicker swap file than the hard drive, but not
as fast as physical RAM. I have a 2 GB one plugged into a USB slot on my Vista system, which has 1 GB of RAM....
What's Using Your Computer's Memory?
Lots of stuff... which offers you hours of detective work and head-scratching. Put these things together and you can free up some memory to put to
- (1) the Start > All Programs > Startup folder turns on some apps when the system boots up.... my laptop has 4 items in the folder, starting with
the Bluetooth Tray.
- (2) the cluster of icons at the right end of you task bar shows some of the running processes. Linger over each for a tooltip that helps you know
what they are, or for other options. The Bluetooth one offers the option to start using it... but no option to close it.
- (3) the Windows Task Manager has the Processes tab that lists the open ones. Clicking on the memory usage column sorts them from most to least
in the amount of memory being used. The defragging going on is my current biggest user. See the BTTray.exe in the list, which correlates with the
first item in the startup folder... it's using 6,872 K of memory...
- (4) Computer Management > Services gives a full list of the processes that are running, along with those that aren't... do a right mouse click
on any of them to see its properties (5), including the path and file name. See from the picture below that the name in this Services list could differ
from the name of the executable that shows in the Task Manager list... this is where some detective work is needed to correlate the service with the
amount of memory being used.
The first item in my Startup folder is the BlueTooth Tray... you can see the same little icon for the service nestled in the flock of icons at the
right of my task bar. Not being a Bluetooth user, it must be using some memory that would be freed up if I turned it off simply by removing it from the
The first in my alphabetical list (4) is the Adobe Elements 5 file agent, which came with the 30 day free trial I installed a bit over a month ago,
which is now up and non-functional. I haven't gotten to the point of uninstalling it or getting a full licensed version... until I do something about
it, it will continue costing 236 K of memory.
The memory used by all the things you don't use, don't need, or didn't clean up from something you tried... can add up to make the difference between
being able to save a complex movie or running into a memory-related issue. My 2 GB of memory on the laptop lets me be a bit sloppy about doing such cleanup,
but even it runs into the familiar error message when saving a movie.
How is your computer working with a server someplace on the internet? Try this handy and cute website.
At home with my Charter internet service, and my laptop connecting via a Linksys wireless router, I get 2932 kbps downloading and 243 kbps uploading
with the suggested server in Chicago.
At Barnes&Noble, which connects through a wireless AT&T service, I get slower 1316 kbps downloading and faster 327 kbps uploading. Sometimes I'll save
my bigger uploads until I get to B&N.
The signal strength with the router is somewhat directional... move your laptop around to check it... if it's connecting to your router, move the antenna
on the router to check it in different positions.
When I turn my laptop on in the morning, I check to see if the power cord is plugged in... if it is, I promise to remember to unplug it the next time
I shut the system down.
Computer repair shops say that a battery can cycle only a limited number of times during it's life and if you leave it plugged in when shut down, it
keeps cycling while doing nothing... but I forget about disconnecting it when shutting down about 25% of the time.
As time goes by, it's normal to have the fully charged battery be able to run the computer for less and less time. My laptop is an energy hog, so I'm
trained to scout for outlets as soon as I go to a new place. I carry a spare battery but don't swap them out very often because I'm usually plugged in.
On a trip to an unknown location, I'll check and charge the spare battery.
If you're using a laptop with a wireless wi-fi connection, the energy to connect supposedly uses about 1/3 of the computer's energy, so turn the wireless
switch off when you don't need it and you're not plugged in.
Some say the laser light lens should be cleaned every now and then, but I'm not a heavy disc maker and have never cleaned one.
Standard advice about burning discs is that they burn more surely if you use slower speed burns. But change the speed only if you run into problems.
Most DVDs are encoded for playing in specific regions... I've never met anyone who changes their setting regularly. My laptop has never changed the
setting and it says I have 4 more changes remaining. If the number of changes left get down to zero, be sure your last one is where you want it to be
for the rest of its life. You can't extend the number of times it can be changed.
The sound of a smoothly turning disc is different than one of a disc with a stuck-on paper label that's off-balance or worse... not having enough head
room. If the sound is off-beat, don't wait too long to open the drive drawer and check what's happening. A paper label could be shredding and leaving
a mess in the drive.
Laptops have less head-room than drives in desktop systems. I bought an Epson R-200 disc printer and print directly onto discs... I've never
used stick-on labels.
How well will the computer work when you install Vista?
The Windows Vista Upgrade Advisor
should tell you about your computer, with specific pointers to what won't or might not work with Vista.... it doesn't get thru the checking
on my laptop without giving an error message, so it might just be running XP forever.
Conclusion and Closing... and What's Next?
It's an ongoing process with no conclusion and hopefully no closing. Tune your computer up regularly and learn a bit more each time.
Movie making is one of the most complex projects you can ask a computer to do, so you'll have plenty of opportunities to use your tune-up knowledge
Have a great week!!
I look forward to comments and discussion about this and other newsletters on the forums at:
Windows Movie Makers.net
Have a great week...
Movie Maker 2 and Photo Story 3 - www.papajohn.org
Photo Story 2 - www.photostory.papajohn.org
Products and Services
I'm involved in anything and everything that supports the users of Movie Maker and Photo Story, and adding more regularly. Some are free and others
Radio and Podcasting
is the only weekly Podcast having more useful information about desktop video editing and production than anywhere else on the Web. Digital video editing,
nonlinear editing, streaming media, software releases, tutorials, business tips, technical help, download of the day and news on the latest products to
make everything easier. It's where professional and consumer desktop video users go to stay on the cutting edge.
Call the phone mail machine to get your technical question answered on the air... call (206)-203-3516
The radio broadcast is from Boston, and the website has downloadable podcast files. The June 19th 2005 podcast was the first 'bi-weekly' show with
a segment about Movie Maker 2. The frequency of radio Q&A sessions about Movie Maker has fallen off as submitted questions are minimal. Maybe Vista
will perk it up a bit.
Movie Maker 2 - Do Amazing Things (with its online companion on www.papajohn.org
), published by Microsoft Press...
Movie Maker 2 - Zero to Hero - with support on the publisher's forum -
Friends of Ed
MaximumPC's winter 2005 quarterly special had a 7 page tutorial 'Make a Killer Home Movie with Maker 2'. The special edition of the
video made for it is on my website as a file download.
The November 2005 edition of Maximum PC had a well done reworked 6 page reprint of the same article, starting on page 42 after the Happy 20th Birthday
article for Windows.
A 7 page tutorial about Photo Story 3 was in the 2006 Summer Special edition.
I just submitted an article about Movie Maker, DVD Maker, and Photo Gallery in Vista for an upcoming issue.
VirtualDub - published by Packt Publishing in April 2005, is the first book about VirtualDub software. I wrote the introductory chapter about
downloading and setting up the software: VirtualDub, VDubMod and AVISynth.
Movie Maker and Photo Story - www.papajohn.org - the site's goals are: doing
amazing things, providing a detailed tutorial for PhotoStory 3, and helping you solve Movie Maker 2 problems.
It's being expanded to include the new version of Movie Maker in Vista, along with the new Photo Gallery and DVD Maker apps.
Online Support - Forums and Newsgroups
I'm a regular or moderator on many online forums and newsgroups, the key ones being:
Forums are open to all for viewing, but require registration of those who want to post. Moderators actively participate to ensure
the forum discussions move forward and stay on track.
Movie Maker and Photo Story forums at Windows Movie Makers
Movie Maker 2 forum at
Newsgroupsare wide open for all to view and post... moderation is collective by the participants.
Windows XP Movie Maker newsgroup -
Photo Story 3 newsgroup -
Movie Maker/Photo Story newsletter. The subscription is $20 for 52 issues, and a link to subscribe is on the main page of
www.papajohn.org or the Products and Services page.
Topics for upcoming newsletters (always subject to change):
#136 - Feb 3 - (open)
Newsletters issued more than 6 weeks ago are posted by Rob Morris to an
Archive Site on his Windows Movie
Makers' website. Links from my website pages to specific newsletters make it easier for viewers to see the content of both while browsing
Drop an email to suggest a topic...
Add-On Transitions and Effects
Transition Maker 2 (TM2) is a utility for the ultimate in
making your own personal and custom transitions for Movie Maker 2. It's a joint product from Patrick Leabo, the programmer, and myself.
beta tested some of the Pixelan packages , including the new packages
for Vista, and think very highly of their people and products.
ProDAD's Adorage packages for Movie Maker 2 are additional sources of very professionally developed transitions and effects.
Here are links
for Movie Maker - Volume 1
PapaJohn's Transitions - Volume 2
PapaJohn's Video Effects - Volume 3
I use a lot of professional background music for movies and stories that was created by
Randon Myles, and act as his agent in selling tunes individually.
There are 62 tunes available from 4 of his many albums... at 99 cents per tune (MP3 or WMA format). Here's a Sample - 45 seconds from 'Groove
2'. The 4 albums are: In the Fields of the on-Feretin , Music for Film Volume III, the Emerald Way, and the Fourth
I don't have a full set of online samples yet, but if you hear something you like in one of my videos, there's a good chance it was done by Randon.
Send an email if you are interested.
more info to manage, consider additional tools that help.
My personal database has been an ongoing project over many years, and is now available to others. A tutorial about using it is on the Managing
> Personal Database page of my site, and more info is in the database package itself.
It's free for the asking to regular newsletter subscribers... send an email request and I'll return it with the zipped file, which is less than
To others it's $10. To order, use the button on the top of the Managing > Personal Database page.
On my list of things to do is a video tutorial showing users tips about using it.
neptune Mediashare is the preferred file download service for Movie
Maker users... there's a 'PapaJohn Expert Zone' where I keep many
of my samples and personal videos.
Check it at N eptune and the Distributing > Neptune
page of the website, where there's a developing tutorial about how to use the service.
and mydeo is the preferred video streaming service. Many of the video
samples for newsletter are on it.
Photo Stories stream as well as or better than movies.
mydeo offers a one month free trial... click the logo or the link to check it out.
In conjunction with the Portage, Michigan library
, I offer free training sessions about Movie Maker and Photo Story, an intro session and a workshop. Upcoming classes are 7-8:30 PM on:
Feb 22, March 29, April 19 and May 17
The classroom has a large screen overhead projection system... and individual laptops for each attendee. You learn by doing, with some coaching.
Other fee-based services
you can't save a movie because your project has become too complex, e-mail a copy and I'll divide it into manageable sub-projects,
and provide detailed instructions about how to render the parts and assemble them into your final movie. $49.95 (no cost if it's not the right solution
or doesn't work) - for details, see the sidebar on the Problem Solving > Can't Save a Movie page of
Movie Maker 2/Photo Story training and support services start at $75 per hour - send an email -
PapaJohn@CharterMi.net and I'll help you determine your needs, and work with
you to plan and implement them.
Wedding combo website/video packages - check the Living Projects section of the website for samples of what you can expect for
the online portion of a package.
© 2007 - PapaJohn; Microsoft is a registered trademark of Microsoft Corporation in the United States and/or other countries.
About John 'PapaJohn' Buechler from Microsoft.com
John "PapaJohn" Buechler, of Kalamazoo, Mich., goes by PapaJohn
online. An avid user of Movie Maker since its first release, and
a regular supporter of the community of Movie Maker users, John
received a 2003 MVP award from Microsoft for that support. In March
2003, he started a comprehensive website about Movie Maker 2 at
He maintains the website, writes books and articles, teaches, and
provides support services - all for the community of Movie Maker
2 users. An engineer by formal education, John is a computer database
and multimedia expert by business and personal experience. He co-authored
the first book about Movie Maker 2 and is actively working on a
second one. You can find his advice in the
Windows XP Movie Maker newsgroup and in the
Windows Movie Makers Forums.
newsletter is republished with permission of John "PapaJohn" Buechler.
Please note that this is an archive of newsletters and some information
may become outdated. PapaJohn, and the webmaster of this site, provides
this information "AS IS" with no warranties.
Visit - PapaJohn's Movie Maker 2 and
Photo Story 2 Newsletter Index